Make the trailer invisible on your Next Generation Escalade ESV with this Cadillac Accessories Trailer Camera Package. This add-on camera enables a Transparent Trailer View ONLY on Escalade ESV Models with Heavy-Duty Trailering Package (RPO ZM1) which includes Trailer View Camera Provisions. It provides an additional driver-activated view from the trailer and projected on your vehicle's infotainment radio screen. This wired trailer camera is designed for placement on the rear of the trailer, inside the trailer, or both (requires 2 cameras). Camera placement on the rear of the trailer provides an additional view point and allows the infotainment system to create the "invisible" or "transparent" trailer. The Transparent Trailer View relies on the factory tailgate camera and this camera mounted at the rear of the trailer to generate a transparent trailer view. This camera is also referred to as an Auxiliary Trailer Camera which can also be used inside the trailer. The Inside Trailer View utilizes the left-side camera port on the Two Trailer Camera Receptacle shown (see images) while the rear trailer camera plugs into the right-side. Two Cameras are required for Inside Trailer View combined with Transparent Trailer / Rear Trailer View. Please note, the Two Trailer Camera Receptacle shown in the images are for reference as a required Factory Option and NOT included in this package. Tension on the camera cable to the connection plug may result in damage not covered by warranty. Avoid putting tension on the cable to the connection plug at all times. For more details, see your owner's manual and review the Transparent Trailer Guide.
Designed and Engineered by Cadillac
Genuine Cadillac Accessories provide Factory Fit, Finish and Function
Adds an additional view from the rear of the trailer to help make the Trailer virtually Invisible
Trailer Camera for models with Two Trailer View Camera Provisions (Receptacle)
Can also be mounted inside the trailer to monitor the trailer contents
Includes trailer camera assembly (with 59ft harness), mounting hardware and installation instructions
Same as RPO code TRO, Auxiliary Trailer Camera
Replaces 85587357, 85004154, 84946379, 84876818, 84518122, 84477541, 84605536, 84580657, 84477539
REQUIRES Heavy-Duty Trailering Package (RPO ZM1). This RPO includes Two Trailer Camera Provisions which is required for the Trailer Camera(s)
Compatible Trailers: Conventional hitch type, Box- or camping-style trailer, No more than 32 feet in length
If you select an incompatible trailer type (e.g., a fifth-wheel hitch or flat trailer), you can’t continue setup
Pulling camera cable to remove connection will result in damage not covered by warranty. Use the finger tabs on cable connection plug for proper removal
Two Trailer Camera Receptacle shown in the images are for reference as a required Factory Option and NOT included in this package
Escalade ESV | Transparent Trailer Camera | Auxiliary Trailer Camera | Models with ZM1s
This product and other Electrical Accessories (Navigation Radios, Tire Pressure Monitor Sensors, Remote Start Systems, Rear Seat Entertainment, etc.) including products which include an authorization code for a Vehicle Configuration Index (VCI) or Vehicle Emissions Control Information (VECI) Label CANNOT be returned once the box has been opened (including cut box, broken seal or package tape).
California Residents:
California Prop 65 WARNING: Cancer and Reproductive Harm. For more information go to https://www.P65Warnings.ca.gov
There are currently no product reviews.
Write Review
My Cart 
